Set the diameter, pick the numbers, add a name. The generator builds a skeleton clock up to 80 cm wide and splits it into parts that fit your bed, with the joints already in them.
Runs in your browser. No CAD, no install. The preview and test pieces are free.
Spokes, a hub and big numbers, 40 to 80 cm across. Split into parts that fit your bed, with the joints already in them. Optional name across the center.
Open Skeleton ClockA 15 to 25 cm dial with a line drawing of the people from your photo, inlaid in a second color. The drawing is made by AI in your browser; the photo never leaves your device. You also get the drawing as SVG.
Open Photo ClockDiameter, number size, four number fonts, Roman numerals, a name in the center, hand style and colors. The 3D preview follows every change.
Every part is measured against your bed before it goes into the ZIP. Long spokes come already rotated to the diagonal. One 3MF holds them all, colored by group.
Each spoke has its hour engraved on the back. Spokes key into the hub, numbers peg into pads at the spoke ends. The README walks you through it.




Previews from the generator at 600 mm. Every number is centered on its spoke by its outline, so the ring reads evenly in any font.
Pick colors for the frame, numbers, center text, hands and second hand, or start from a preset. Four hand styles, adjustable length and width, an optional second hand. Hide the hands to see the clock face clean.
The colors you pick go into the 3MF and the README, so the parts arrive grouped the way you will print them.
One ZIP with print-ready files and a README written for the exact clock you configured.
JANMI – Skeleton Clock Diameter 600 mm, numbers 60 mm, font Script. Movement: hand holes 5.2 / 3.4 mm Parts are laid out for a 250 × 250 mm bed. PARTS hub.stl 100 × 100 × 21.7 mm color 1 (frame) spoke_04.stl 211 × 15 × 11.0 mm color 1 (frame) spoke_12.stl 248 × 19 × 11.0 mm color 1 (frame) number_12.stl color 2 (numbers) hand_minute.stl color 4 (hands) foot_print_2x.stl color 1 – print 2× ASSEMBLY 1. Slide spoke 12 sideways into the pocket under the keyhole hanger and glue it. 2. Insert the other spokes from the back by their engraved hours ...
Access codes will be available through a MakerWorld crowdfunding campaign and through PayPal. One export is one configured clock; downloading the same clock again is free. See the license for what each plan allows.
The hub is made for a 56 mm square quartz movement such as the Bambu Lab Clock Kit 011. You choose the hand hole sizes: 5.2 / 3.4 mm for the kit, or 5.6 / 3.8 mm for long-shaft movements.
The longest spoke has to fit your bed diagonally. That gives 560 mm on a 180 mm bed, 760 mm on 250 mm and 800 mm on 300 mm. The slider stops there on its own.
The frame, hub joint and hands come from a 600 mm clock that was printed and hangs on a wall. Print the free test pieces first to check the peg fit on your printer. Where a setting is not print-tested yet, the generator says so.
No. The clock is built in your browser. The server only checks your access code and counts exports.